Archive for the ‘Tips and Tricks’ Category

There may be times when you have installed Windows 7 and then you felt the need of Windows XP also. So finally you decide to dual boot windows 7 with windows xp. If you install windows xp, then there won’t be any option to boot into windows 7. So now you’ll need to restore the bootloader of Windows.

Follow these steps (with acute care):

  1. Install Windows XP in a different partition (other than Windows 7)
  2. After installing, bootloader will be gone. Don’t worry, that’s bound to happen. Because Windows XP writes its bootloader over Windows 7.
  3. Insert Windows 7 DVD and boot from it and click on “Repair my computer”.
  4. In the next step, click on “Command Prompt”
  5. Type these commands:

bootrec /fixmbr (press enter)
Bootrec /fixboot (press enter)

So that’s done. Restart the Computer and you will see that the Windows 7 bootloader will be restored. If not, then install EasyBCD.

  1. Install EasyBCD and start this utility
  2. Click on Add New Entry
  3. Now simply select the type and change the name as per your wish and click on Add Entry and then click on Save


This is an amazing utility, which can help you very much in this. Through this, you can even change the timeout to show operating systems, select the default OS, move up and down entries and much more. What’s more, this is just 1.3 MB in size. Go ahead and use this nifty utility. After doing this, just restart the PC and you will be able to see two options, XP and 7 🙂


Whenever I open Run and type regedit and press enter a messageprompt appears saying Registry editing has been disabled by your administrator“.

Let’s see how can we fix it.Here i got 3 Methods to fix this Problem which i have collected them from Net.

Method 1:

You can use a simple UnHookExec.inf to enable registry editing.

1. Download UnHookExec.inf
2. Right click on the downloaded file and select install.

Method 2:

For enabling you can also use the remove restrictions tool(RRT) by, if the method 1 doesn’t work for you.

1. First Download Remove Restrictions Tool
2. Run and check the registry tools and click apply.

Method 3:

If the above two methods does not work for you , you can also try executing a small vbscript which I found on major geeks.

1. First Download EnableRegEdit.vbs
2. Double click on the downloaded file to enable registry editing.

I hope at least one of the above will help to fix the trouble.


MONDAY, MAY 28, 2012

How To Clean Your RAM Using Notepad


Cleaning your RAM using notepad

Many friends of me ask where can I download a software which can keep my RAM free? And I found these software are nothing but using some lines of code which can be implemented by using notepad or any editor tool. So if any one does not have any software, you can use it by doing the following things which I am going to mention.

Steps to Clean Your RAM Using Notepad:

Step 1: Open Notepad
Step 2: Type FreeMem=Space(10240000000)
Step 3: Save it as “CLEANER.VBS” in any location you like.
Step 4: You can edit the code and write 512 instead of 1024 if you own a 512mb RAM or change to anything you like.
Step 5: Run it !

After this final step your RAM will be free.

Hope you enjoyed it. :)
Please Pass comments on i

Reader David is an avid Gmail user who recently spent five weeks in Brazil, where “any form of permanent [Internet] connection was far from possible.” In other words, he quickly grew frustrated with Gmail because of his limited connectivity.

After all, Google’s mail service lives in your Web browser, and when you can’t get online, you can’t access your messages (new or old). This is true of other Web-based mail services as well, like Hotmail and Yahoo, but Google recently unveiled a new option for offline mail access.

Known as Gmail Offline, this browser plug-in allows users to read, respond to, and search mail even when there’s no Internet connection. It has a nice-looking, simplified interface that’s similar to what you typically see in Gmail–but with fewer options.

Unfortunately, for the moment Gmail Offline is available only for Google Chrome. On the plus side, similar plug-ins are forthcoming for Google Calendar and Google Docs.

There is, of course, another option, one that can solve the offline problem for not just Gmail, but also Hotmail and Yahoo Mail Plus: an e-mail client like Windows Live Mail 2011 or Mozilla Thunderbird 6. Programs like these can be configured to download e-mail and store it locally, thus allowing you to read, respond, and search–just like with Gmail Offline. Just make sure you stick with a POP3 configuration rather than IMAP, as the latter requires a live Internet connection for many functions.

Setting up a wireless router is straightforward as long as you have a PC with a wireless network adapter, as well as an active high-speed Internet connection. You might also need a computer with a wired network adapter and router-specific setup software, which is typically included on a disc packaged with your router or available for download on the router manufacturer’s support site.

If you have a router labeled with a Windows 7 logo and you are using Windows 7, setting things up should be quick if you follow the steps below.


1. Connect the wireless router to your modem using an ethernet cable.

2. Connect your wireless router to a power source. Wait about a minute, and then continue to the next step.

3. Click the network icon in the notification area; the icon should look like a series of vertical bars, or a tiny PC with a network adapter alongside it.

4. Select your wireless network from the list of available networks to complete the setup process. By default, your network name will be the name of your router manufacturer.

Although newer routers connected to Windows 7 PCs are generally simple to set up, someproblematic wireless routers might require a little more attention. If you can’t set up your wireless router as explained above, follow the directions included with it. Chances are, you’ll need to use one of the following two strategies.


1. Make sure that your wireless router is completely disconnected from the modem, the computer, and the power source.

2. On your PC, insert the disc that came with your router, or download and run the latest version of the router’s software from the vendor website.

3. Follow the on-screen instructions. The setup routine will ask you to connect components (including your modem and PC) in a certain order, and it may request that you temporarily connect your wireless router to a computer via an ethernet cable. You will also create a wireless network name and password at this point. If something goes wrong, you may want to consider manually configuring your wireless router.


1. Connect your wireless router to the modem, using an ethernet cable.

2. Connect the wireless router to a power source. Wait about a minute to ensure that your router is fully operational.

3. Connect the wireless router to your computer using an ethernet cable.

4. Log in to your router’s Web interface by opening a browser and entering the IP address of your router into the address bar. The IP address should be listed within your router’s documentation; if you can’t find it, most routers use a common IP address such as,, or

5. Enter the default username and password, which you should find within your router’s documentation. Alternatively, visit Port Forward’s Default Router Passwords page.

6. Use the Web interface to set up a network name and password.

7. Disconnect your computer from the wireless router and then reconnect wirelessly. Finally, check out our router tips to speed up your wireless connection.

It may seem as if all Internet connections are the same, but some differences–beyond price–exist between Internet service providers, and between types of connections that a single ISP offers. This guide is designed to help you choose the ISP and the connection that best suit your small or midsize business or organization.


When shopping for Internet access, you’ll probably encounter several marketing terms frequently. Broadband and high-speed are used to describe pretty much any type of Internet connection that provides bandwidth speeds faster than traditional dial-up access–and nearly all connections offered today qualify as faster than dial-up. Wideband, a relatively new term, refers to connection types that provide throughput at levels approaching or exceeding 50 mbps.

Here are the three most common connection types you’re likely to see when shopping for an ISP.

DSL: This is generally the cheapest connection type, with business-class prices ranging from $30 to $90 per month. Though DSL uses traditional telephone lines, you can carry on voice calls and transfer data simultaneously. DSL performance depends on how far your location is from the ISP’s exchange, but speeds may reach 15 mbps for downloads and 1 mbps for uploads, which can support a dozen typical users simultaneously or a point-of-sale system.

Cable: This is one of the most popular connection types. Monthly prices for cable range from $60 to over $300. The technology works over standard television cable lines, but it permits concurrent TV viewing and even digital phone use. ISPs may offer cable speeds of 50 to 100 mbps for downloads and 2 to 10 mbps for uploads–enough for a few dozen simultaneous users. Cable connections share bandwidth among other users in the vicinity, so speeds may be slower during peak (work) hours.

Fiber: This newer connection type offers superior performance. Telecommunication companies have been using fiber-optic lines in their backbone infrastructure for some time now, and in the past few years they have extended the fiber connections closer to end-users. Some companies run fiber-optic cabling to a neighborhood distribution point, as is the case with AT&T U-verse, and then make the connection to individual buildings via existing copper lines. Others, likeVerizon FiOS, are installing fiber connections all the way to their customers. Fiber-optic connections permit download speeds of 15 to 150 mbps and upload speeds of 5 to 35 mbps. Monthly pricing ranges from $70 to $200. Since fiber provides such high bandwidth, it can easily provide TV, phone, and Internet service for 24 simultaneous users.


ISPs offer a couple of service levels or plans for each connection type. The main point of distinction between levels is the bandwidth speed. Choosing a suitable speed is one of the key decisions you must make.

Generally, the greater the number of people who’ll be using the connection, the more bandwidth you’ll need. In addition, the more performance-intensive the users’ needs are–for example, watching or streaming video, downloading large files, or using Internet-connected VoIP phones–the more the bandwidth you’ll need. On the other hand, users who want to use their connection for email and browsing the Web won’t need as much bandwidth.

Some ISPs have begun to cap data usage. Under a data cap, if you exceed the data transfer limit during a billing cycle, the ISP may automatically throttle back your speeds for the remainder of the cycle, or it apply a surcharge to your bill. But unless you stream an extensive amount of video or download a great many large files, you probably won’t run afoul of a data cap.


Make sure to read the fine print of SLAs and other service contract documents.It’s important to read and analyze the fine print of a service provider’s contract before signing up. The prices that most companies post online are conditional: Many require contracts, ranging from one to three years in order to get the advertised monthly service rate. In addition, some prices include a discount for a set amount of time or are locked in for a limited period. You may even see prices listed that apply only when you arrange to subscribe to a bundle of Internet, phone, and TV service.

Most ISPs offer a service level agreement (SLA) that spells out the service’s performance and support terms, including up-time guarantees, support availability, and guaranteed response-time for support or fixes; they usually also state your compensation if the ISP fails to meet its obligations under the agreement. Compare the SLAs of any providers you’re looking at before you sign a contract.

Other policies of note are the ISP’s subscriber agreement, its terms of service (ToS), and its acceptable use policy. These documents state the rules governing how you may use the service, including any bandwidth or data usage limits that may be in force. You can browse the ISP’s site for these documents or run a Google search for the company name and the word “policies.”


Consider the hardware each ISP provides. Some services provide nothing more than a basic modem, while others may give you a gateway that includes a router with ethernet ports, firewall protection, or even a built-in Wi-Fi router. ISPs rarely post this type of information on their website, so you’ll probably have to call the service’s sales line for details.

Installation or activation fees are another variable. Some companies provide free installation and activation, but most make waiving the associated fees (typically $100 to $150) contingent on your accepting a one-, two-, or three-year contract.

Since ISPs usually install the basic Internet modem or gateway and verify access on a single computer, you’ll likely be responsible for setting up the service on your other computers. DSL providers normally provide kits for the user to install, in lieu of offering professional installation; fortunately, most such kits are easy to set up.